What Crosby homes are made of
- Era
- 1950–1972
- Dominant styles
- Bungalow · Semi-detached · Post-war (1950s) · Post-war (1960s) · Sidesplit
- Postal area
- L4C
Where Crosby homes are most exposed
If the property has a front door, inspect the complete assembly rather than inferring its condition from the age of the house. Note previous repairs, daily use and any restrictions on changes.
Bungalow and sidesplit basements in this area often have windows near grade that are screened by established shrubs or fence lines. Those windows are a lower-noise option that may go unnoticed from the street. An assessment checks each basement window for film coverage and secondary locking.
Why access and visibility matter in Crosby
Crosby is an older Richmond Hill neighbourhood centred on the Yonge Street and Major Mackenzie Drive corridor. Post-war construction on relatively narrow lots means side passages between homes are tight, and rear yards are accessed either through a side gate or via a rear lane on some blocks. The Yonge Street arterial brings higher pedestrian and vehicle traffic to the neighbourhood's western edge.
Local risk profile
- If the property has a front door, inspect the complete assembly rather than inferring its condition from the age of the house. Note previous repairs, daily use and any restrictions on changes.
- Check the sidelight glass beside the entry from the accessible side of the property. Record the glass and frame condition, existing film or coatings, and any access constraints before choosing a product.
- If a window faces a lane, shared access or a landscaped boundary, record its actual accessibility and sightlines during the assessment. Neighbourhood activity does not establish how an entry attempt would be noticed.
- Rear patio sliders added during 1970s and 1980s renovations of original bungalows often use older frame hardware with basic latches. Treat those sliders as a primary concern, not an afterthought.
- Review the existing door assembly and any prior modifications. A neighbourhood or construction date does not establish hardware condition or a tested level of forced-entry resistance.
Common points of entry to check
- Front-door kick-in
- Sidelight glass
- Rear patio slider
- Basement window
- Ground-floor window
What Clear Guard would usually inspect first
Assess ARX Guard door fortification for the front door. Confirm the existing assembly and any property restrictions before recommending work.
Assess security film for the identified glass, including compatibility, frame condition and attachment requirements. Film can help retain broken glass; it does not guarantee that entry will be prevented.
Low-visibility basement windows near grade and rear windows facing screened yards are scoped for film coverage during the assessment. Film keeps glass bonded and requires sustained, noisy effort to clear.
What we verify before recommending work
- Inspect the front door and frame for condition, fit and prior modifications.
- Measure sidelight glass proximity to the deadbolt and interior latch on the front entry.
- Walk the rear yard and side passage to assess visibility from the street and neighbouring properties.
- Identify basement windows near grade and note whether they are obscured by shrubs or fencing.
- Check the rear patio door or sliding door: many bungalow renovations added a rear patio slider not present in the original build.
Authoritative sources for this neighbourhood
- Police service: York Regional Police
- Crime data portal: Open data ↗
York Regional Police is the authority for public crime data in this area. Where the public dataset does not publish a neighbourhood row, we avoid neighbourhood-level numbers and use the page only for jurisdiction, source links, housing type, and entry-vector analysis.
Related homeowner education
GTA homeowners face new security exposures every summer. Learn which entry points shift with the season and the five checks to make before your first summer trip.
Security film adds resistance after glass breaks. See how XPEL 14 mil, frame attachment and window priorities can help protect your home and family.
A break-in happened nearby. Here is a calm, step-by-step checklist covering what to check, what to skip, and how to harden your home without panic.
Most families rely on one security layer: the alarm. Here's how detection, delay, and a family retreat plan work together as a complete system.
A standard deadbolt resists most hand pressure, but the door frame it is mounted in often fails first under repeated kick force. Here is what is actually at risk and what to do.
See how XPEL security film holds broken glass together, how frame attachment helps retain it, and what that means for patio doors and ground-floor windows.
Bubbles, haze, and curing time are all normal after security film is installed. Here's what to expect, and how to care for your film during the 60–90 day cure.
Basement windows are single-pane, at ground level, and often overlooked. Here's why they're vulnerable and why security film is often the right answer.
Patio and sliding doors are a common forced-entry target across the GTA. We explain why standard patio doors fail and what you can do about it without replacing the door.
Privacy locks and deadbolts serve different purposes. Here's which lock belongs on which door, especially for your family retreat plan.
Before investing in security film, identify what type of glass you have. Simple tests help you decide if film, replacement, or nothing is the right choice.
Open houses create temporary security vulnerabilities. Here's how to protect valuables and turn security investments into selling points.
A plain look at break-and-enter occurrences across the GTA in April 2026: Toronto, Peel, York, Halton, and Durham regional police data in one place.
Use this six-stop GTA home walk-around to review doors, nearby glass, patio sliders, lower windows, and an attached-garage passage door.
Review the door between an attached garage and your Richmond Hill home without compromising closing, weatherstripping, or life-safety functions.